Tel: 00353 402 32116
> ALL

Product Detail

< Back

MineSafe Mark U 38043526 N/F FLOrg*
Enlarge
MineSafe Mark U 38043526 N/F FLOrg*
Supplier Code: 18MM526
Ex VAT 8.26 EACH

Mine Marking NF Vert Orange 400G

Marking Out Paint - Upright - Inverted

* Non-flammable layout marker

* Formulated for use in underground mines and other fire sensitive situations

* 360º degree valve for any direction spray

* Bright, highly visible marks on dark surfaces

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.

TECHNICAL DATA

Size: 400g Aerosol

Finish: Matt

Colour: 4 Standard and 3 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 5 minutes at 25°C

Ideal Application Temperature: Between -10°C and 40°C

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

Ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

KEEP OUT OF REACH OF CHILDREN

Technical Product Files

No product files are currently available for this product.

         

 









Follow us