Tel: 00353 402 32116

Product Detail

< Back

Mine Marking U 38033511
Enlarge
Mine Marking U 38033511
Supplier Code: 18MM531
Ex VAT 9.38 EACH

Mine Marking 38033511

Marking Out Paint - Upright Inverted Spray - 350g

* Specially formulated for above/below ground areas

* High opacity, high quality, true colour pigment loading

* 360º degree valve for any direction spray

* Applications include marking out ore zones in grading control, pit walls and survey grid layouts

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.

TECHNICAL DATA

Size: 350g Aerosol

Finish: Matt

Colour: 7 Standard and 6 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 3 minutes at 25°C

Temperature: Between -10°C and 40°C

STORAGE

Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.



KEEP AWAY FROM CHILDREN

Technical Product Files

No product files are currently available for this product.

         

 









Follow us