ALL
Mine Marking 380135
Marking Out Paint - Horizontal - 350g -Horizontal features a standard paint nozzle (for where the main application is side walls
* Specially formulated for above/below ground areas specially formulated for above/below ground areas (not recommended for underground coal mines - use Safe Mark)
* High opacity, high quality, true colour pigment loading
* 360º degree valve for any direction spray
* Applications include marking out ore zones in grading control, pit walls and survey grid layouts
* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.
TECHNICAL DATA
Size: 350g Aerosol
Finish: Matt
Colour: 7 Standard and 6 Fluoro Colours
Consistency: Liquid
Coverage: Approximately 2-4 sqm per can (depending on the surface)
Suitable Surfaces: Rock, dirt, gravel
Drying Time: 3 minutes at 25°C
Temperature: Between -10°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP AWAY FROM CHILDREN
Spray & Mark 400135Marking Out Paint - Inverted - 350g
Dy-Mark’s Spray & Mark is a premium marking out paint designed for a range of applications, including construction,landscaping, civil works and surveying. Spray & Mark is suitable for use with the Long Arm Handle and 2 wheel Spot Marking Handle, also available from Dy-Mark.
* Toluene-free formula
* High opacity, high quality, true colour pigment loading
* Unique spray pattern specifically designed for spot marking as well as "writing" applications
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can in the inverted position, approximately 15 – 20cm from surface. Spray thickness can be adjusted by moving
closer or further away from the surface to be sprayed.
TECHNICAL DATA
Size: 350g Aerosol
Finish: Matt
Colour: Red, Blue, Yellow, White, Fluoro Green, Fluoro Pink, Fluoro Orange
Consistency: Liquid
Coverage: Will produce 200 ‘X’ marks, 80 - 100m in a 50mm continuous line, or cover 4 - 6 sqm
Suitable Surfaces: Concrete, bitumen, grass, rock, steel, timber and general broken ground
Drying Time: 5 minutes at 25°C
Ideal Application Temperature: Between 10°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.
Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
* Slip resistance required
* Surface type
* Volume of traffic
* Potential exposure to any surface contaminants e.g. water, solvents or chemicals
KEEP AWAY FROM CHILDREN
Line Marking Paint 41015011 Durable Line Marking Paint - 500g
Dy-Mark’s Line Marking Paint is a fast drying acrylic paint, specially formulated to provide long lasting lines. Line Marking Paint is designed for use with the Dy-Mark Line Master and ideal for marking on car parks, factories,
warehouses, sporting fields and courts.
A fast drying acrylic paint, designed for use with the Dy-Mark Line Master
Specially formulated to provide long lasting lines
Ideal for marking out car parks, factories, warehouses, sporting fields and courts
Toluene-free formula
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Insert can into the Line Marking Machine’s Spot Marking Handle. To achieve the narrowest line width, the spot marking handle must be inserted into the lowest position. Line width can be increased by raising handle in slot. Line width ranges between approx. 60mm and 100mm. Test line width by marking on cardboard until desired width is achieved. Masking wheels are designed to sharpen lines by catching any overspray at the edges only.
TECHNICAL DATA
Size: 500g Aerosol
Finish: Matt
Colour: 8 Standard Colours
Consistency: Liquid
Coverage: 80 – 100 metres of line per aerosol can (depending on line width)
Suitable Surfaces: Concrete, bitumen, grass, soil, timber
Drying Time: 10 minutes at 25°C
Ideal Application Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.
Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
* Slip resistance required
* Surface type
* Volume of traffic
* Potential exposure to any surface contaminants e.g. water, solvents or chemicals
KEEP AWAY FROM CHILDREN
Spray Ink Stencil & Colour Coding Paint 315g
Dy-Mark’s Spray Ink is a Toluene free stencil and colour coding paint which is suitable for marking on many surfaces. Available in a bold colour range, the unique formulation of Spray Ink minimises build-up when used with stencils.
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 10 – 20cm from the surface. For best results, spray the surface using a side-to-side motion.
Toluene-free formula
Specially formulated for stencil applications
Also suitable for general colour coding
Fast drying and lightfast paint
Reduced spray drift allowing maximum accuracy of spray pattern
Unique formulation minimises build-up when used on stencils
TECHNICAL DATA
Size: 315g Aerosol
Finish: Matt
Colour: 11 Colours
Consistency: Liquid
Coverage: Approximately 3 sqm per can (depending on the surface)
Suitable Surfaces: Will suit most surfaces including metals, timber, plastic, canvas and cardboard
Drying Time: 10 minutes at 25°C
Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP AWAY FROM CHILDREN
Spray Writer 370235 Forestry & Plantation Marking Paint - 350g
Dy-Mark’s Spray Writer is a reduced toxicity spray for all natural and cut timber applications. With reduced spray drift and low odour this convenient 360° marker is ideal for the forestry and timber processing industries. Spray Writer is also suitable for use in the construction industry.
The product has been formulated to mark wet surfaces without cracking or flaking.
* Toluene-free formula
* Ideal for all natural and cut timber applications
* Will mark wet surfaces without cracking and peeling
* Unique formulation reduces spray drift allowing maximum accuracy of spray pattern
* Ideal for the forestry and timber processing industries
* Also suitable for marking masonry and concrete
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 15 – 20cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.
TECHNICAL DATA
Size: 350g Aerosol
Finish: Matt
Colour: 8 Standard and 7 Fluoro Colours
Consistency: Liquid
Coverage: Approximately 2 sqm per can (depending on the surface)
Suitable Surfaces: Natural and cut timber, concrete, masonry, bitumen
Drying Time: 10 minutes at 25°C
Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions. Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
* Slip resistance required
* Surface type
* Volume of traffic
* Potential exposure to any surface contaminants e.g. water, solvents or chemicals
KEEP AWAY FROM CHILDREN
Turf Master Temporary Grass Marking Paint 500g
Dy-Mark’s Turf Master is a quick drying marking paint designed for temporary application to grass –
without killing the roots. Turf Master is ideal for a range of applications including landscaping, sporting
grounds and golf courses.
* Quick dry, toluene-free formula
* Low toxicity formula does not damage grass
* Ideal for landscaping and sporting grounds
* Designed for use with the Dy-Mark Line Master
* Also suitable for use by hand (nozzle available separately)
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Insert can into the Line Master Spot Marking Handle. To achieve the narrowest line width, the spot
marking handle must be inserted into the lowest position. Line width can be increased by raising handle
in slot. Line width ranges between approx. 60mm and 100mm. Test line width by marking cardboard
until desired width is achieved. Masking wheels are designed to sharpen line edges by catching any
overspray at the edges only.
Removal
Turf Master can be removed with the use of water, a stiff brush and detergent.
TECHNICAL DATA
Size: 500g Aerosol
Finish: Matt
Colour: White
Consistency: Liquid
Coverage: 80 – 100 metres of line per aerosol can (depending on line width)
Suitable Surfaces: Grass
Drying Time: 10 minutes at 25°C
Ideal Application Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.
Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
? Slip resistance required
? Surface type
? Volume of traffic
? Potential exposure to any surface contaminants e.g. water, solvents or chemicals
KEEP AWAY FROM CHILDREN
Paint Marker P10 Medium Bullet Tip Black
High performance paint marker
Xylene-free, fast dry formula
Replaceable, heavy duty tips
Bold, easy to read marks
Pen dimensions: 142 x 14mm
Mark Width: 2mm
Contents: 10cc fast drying, Xylene-free paint
Paint Marker P20 Reversible Bullet/Chisel Tip 12072002 RED
High performance paint marker
Xylene-free, fast dry formula
Replaceable, heavy duty and reversible tips
Bold, easy to read marks
Pen dimensions: 135 x 16mm
Mark Width: Chisel Tip 4mm, Bullet Tip 2mm
Contents: 13cc fast drying, Xylene free paint
Paint Marker P30 Broad Chisel Tip 12073005 Yellow
High performance marker
Xylene-free, fast dry formula
Replaceable, heavy duty tips
Bold, easy to read marks
Industrial Marker Duo Permanent Ink 12091001 Black
Permanent ink marker suitable for surfaces that need an indelible mark
Xylene-free, fast-dry formula
Reversible bullet/chisel tip
Suitable for marking on wood, plastics, metals and cardboard
Aluminium shell with airtight cap
Pen dimensions: 135 x 16mm
Mark Width: Chisel Tip – 4mm, Bullet Tip – 2mm
Contents: 13cc permanent, smear resistant ink
Technical Product Files
No product files are currently available for this product.