ALL

BK1 - Burn Kit - Contents Include:

1 x Burn Kit Box

1 x Paramedic Shears

1 x 120ml Bottle Of Burnfree Cooljel 118ml

2 x 10cm x 10cm Burnfree Dressings

2 x Pks (3) Burnfree Sachets

2 x 3" Conform Bandages

1 x 1" Zinc Oxide Tape

2 x Steropad Non-Adherant Dressings

1 x Pair Of Latex Gloves

3M™ Scotch-Brite™ Purple Diamond

This finest quality floor pad contains high quality synthetic diamonds for the simultaneous cleaning and buffing of floors.

This finest Scotch-Brite™Purple Diamond Floor Pad consists of fine/medium size fibres to enable fast polishing and extensive cleaning action on floors. The active dark purple side is impregnated with synthetic diamonds for simultaneous cleaning and buffing of floors, bringing them to an excellent gloss level.

The pad offers high durability and productivity, and it's flexible structure means that it is easy to clean after use.

Part Number SBPU

Application Polishing - Cleaning

Pad Diameter 254-533mm

Machine Speed 150-3000 RPM

Pad Colour Purple

3M™ Scotch-Brite™ Sienna Diamond Pad 17"

This finest quality Scotch-Brite™ floor pad is specially designed with diamonds to bring dull/worn marble and terrazzo surfaces to a medium shine.

This premium quality floor pad contains synthetic diamonds in the active sienna coloured dark side that enhance floor shine.

The Scotch-Brite™ Sienna Diamond Floor Pad offers great benefits in durability and productivity, and it's flexible structure means that it is easy to wash after use.

Part Number SIENNA

Application Cleaning

Pad Diameter 254-533mm

Machine Speed 150-3000 RPM

Pad Colour Sienna

MineMarkingHandle 5m Aluminium - 38100603

Features & Benefits

• Aluminium handle designed for use with Dy-Mark’s Mine Marking and Mine Marking Non-Flammable paint
(vertical format cans only)

• Extends up to 5 metres

• Ideal for extended non-contact marking

• Reduces repetitive back strain

• Ideal for marking mine ceilings and top of mine face

Line Master Machine Line Marking Machine 41800203

Ergonomic design with built-in side line attachment

Heavy duty steel construction

Lightweight, removable handle for spot marking

Easy to transport

Includes utility tray and storage for up to 5 cans of Dy-Mark’s Line Marking Paint and Turf Master Paint

Line width adjustable between approximately 60mm and 100m

Car Park Stencil Kit - 13320003

Long-lasting and reusable stencils in heavy duty polypropylene material

Ideal for marking out applications in service areas, car parks, hospitals, warehouses, shopping centres and recreation areas

Apply stencil using Line Marking Paint and the Line Master removable handle or by rolling or spraying

Mine Marking NF Vert Orange 400G

Marking Out Paint - Upright - Inverted

* Non-flammable layout marker

* Formulated for use in underground mines and other fire sensitive situations

* 360º degree valve for any direction spray

* Bright, highly visible marks on dark surfaces

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.

TECHNICAL DATA

Size: 400g Aerosol

Finish: Matt

Colour: 4 Standard and 3 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 5 minutes at 25°C

Ideal Application Temperature: Between -10°C and 40°C

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

Ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

KEEP OUT OF REACH OF CHILDREN

Mine Marking 38033511

Marking Out Paint - Upright Inverted Spray - 350g

* Specially formulated for above/below ground areas

* High opacity, high quality, true colour pigment loading

* 360º degree valve for any direction spray

* Applications include marking out ore zones in grading control, pit walls and survey grid layouts

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.

TECHNICAL DATA

Size: 350g Aerosol

Finish: Matt

Colour: 7 Standard and 6 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 3 minutes at 25°C

Temperature: Between -10°C and 40°C

STORAGE

Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.



KEEP AWAY FROM CHILDREN

Mine Marking 380135

Marking Out Paint - Horizontal - 350g -Horizontal features a standard paint nozzle (for where the main application is side walls

* Specially formulated for above/below ground areas specially formulated for above/below ground areas (not recommended for underground coal mines - use Safe Mark)

* High opacity, high quality, true colour pigment loading

* 360º degree valve for any direction spray

* Applications include marking out ore zones in grading control, pit walls and survey grid layouts

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.


TECHNICAL DATA

Size: 350g Aerosol

Finish: Matt

Colour: 7 Standard and 6 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 3 minutes at 25°C

Temperature: Between -10°C and 40°C

STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.



HIGHLY FLAMMABLE

Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

KEEP AWAY FROM CHILDREN

Spray & Mark 400135Marking Out Paint - Inverted - 350g


Dy-Mark’s Spray & Mark is a premium marking out paint designed for a range of applications, including construction,landscaping, civil works and surveying. Spray & Mark is suitable for use with the Long Arm Handle and 2 wheel Spot Marking Handle, also available from Dy-Mark.



* Toluene-free formula

* High opacity, high quality, true colour pigment loading

* Unique spray pattern specifically designed for spot marking as well as "writing" applications



Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.



Application

Hold can in the inverted position, approximately 15 – 20cm from surface. Spray thickness can be adjusted by moving
closer or further away from the surface to be sprayed.



TECHNICAL DATA

Size: 350g Aerosol

Finish: Matt

Colour: Red, Blue, Yellow, White, Fluoro Green, Fluoro Pink, Fluoro Orange

Consistency: Liquid

Coverage: Will produce 200 ‘X’ marks, 80 - 100m in a 50mm continuous line, or cover 4 - 6 sqm

Suitable Surfaces: Concrete, bitumen, grass, rock, steel, timber and general broken ground

Drying Time: 5 minutes at 25°C

Ideal Application Temperature: Between 10°C and 40°C


STORAGE

Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION
HIGHLY FLAMMABLE

Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.

Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:

* Slip resistance required

* Surface type

* Volume of traffic

* Potential exposure to any surface contaminants e.g. water, solvents or chemicals
KEEP AWAY FROM CHILDREN

Line Marking Paint 41015011 Durable Line Marking Paint - 500g

Dy-Mark’s Line Marking Paint is a fast drying acrylic paint, specially formulated to provide long lasting lines. Line Marking Paint is designed for use with the Dy-Mark Line Master and ideal for marking on car parks, factories,
warehouses, sporting fields and courts.

A fast drying acrylic paint, designed for use with the Dy-Mark Line Master

Specially formulated to provide long lasting lines

Ideal for marking out car parks, factories, warehouses, sporting fields and courts

Toluene-free formula

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Insert can into the Line Marking Machine’s Spot Marking Handle. To achieve the narrowest line width, the spot marking handle must be inserted into the lowest position. Line width can be increased by raising handle in slot. Line width ranges between approx. 60mm and 100mm. Test line width by marking on cardboard until desired width is achieved. Masking wheels are designed to sharpen lines by catching any overspray at the edges only.

TECHNICAL DATA

Size: 500g Aerosol

Finish: Matt

Colour: 8 Standard Colours

Consistency: Liquid

Coverage: 80 – 100 metres of line per aerosol can (depending on line width)

Suitable Surfaces: Concrete, bitumen, grass, soil, timber

Drying Time: 10 minutes at 25°C

Ideal Application Temperature: Between 5°C and 40°C

STORAGE

Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION
HIGHLY FLAMMABLE

Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.

Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:

* Slip resistance required

* Surface type

* Volume of traffic

* Potential exposure to any surface contaminants e.g. water, solvents or chemicals
KEEP AWAY FROM CHILDREN