Mine Marking 380135

Marking Out Paint - Horizontal - 350g -Horizontal features a standard paint nozzle (for where the main application is side walls

* Specially formulated for above/below ground areas specially formulated for above/below ground areas (not recommended for underground coal mines - use Safe Mark)

* High opacity, high quality, true colour pigment loading

* 360º degree valve for any direction spray

* Applications include marking out ore zones in grading control, pit walls and survey grid layouts

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.


TECHNICAL DATA

Size: 350g Aerosol

Finish: Matt

Colour: 7 Standard and 6 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 3 minutes at 25°C

Temperature: Between -10°C and 40°C

STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.



HIGHLY FLAMMABLE

Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

KEEP AWAY FROM CHILDREN