Tel: 00353 402 32116
Login
Email:
Password:

Product Detail

< Back

MineSafe Mark U 38043526 N/F FLOrg*
Enlarge
MineSafe Mark U 38043526 N/F FLOrg*
18MM526
Ex VAT 8.26 EACH

Mine Marking NF Vert Orange 400G

Marking Out Paint - Upright - Inverted

* Non-flammable layout marker

* Formulated for use in underground mines and other fire sensitive situations

* 360º degree valve for any direction spray

* Bright, highly visible marks on dark surfaces

* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.

TECHNICAL DATA

Size: 400g Aerosol

Finish: Matt

Colour: 4 Standard and 3 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2-4 sqm per can (depending on the surface)

Suitable Surfaces: Rock, dirt, gravel

Drying Time: 5 minutes at 25°C

Ideal Application Temperature: Between -10°C and 40°C

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

Ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

KEEP OUT OF REACH OF CHILDREN




Workwear and PPE Blog



Cleanroom gloves: reducing cross-contamination and wastage
By Niall Kelly on Wed 16 July 2025
Traditional glove dispensers also tend to lead to a lot of wastage and cross-contamination, but what if there was a better way?
M.A. Healy's to host MASCOT Summer Open Day
By Niall Kelly on Mon 14 July 2025
M.A. Healy & Sons Ltd, the Safety Shop, are excited to announce that we’ll be holding a special MASCOT WORKWEAR Open Day in our Arklow store this Saturday, 19th July.
M.A. Healy's support Wicklow Pride 2025
By Niall Kelly on Thu 03 July 2025
It is with pleasure that M.A. Healy & Sons Ltd., the Safety Specialists, are supporting Wicklow Pride 2025.
M.A. Healy's to host a MASCOT Workwear Open Day
By Niall Kelly on Wed 02 July 2025
This summer, M.A. Healy is excited to announce that we will be holding a special MASCOT Workwear Open Day in our Arklow store. Join us on Saturday 19th July, when we showcase the very best of our MASC


Testimonials
Bolle
Bolle safety have been dealing with M.A.Healy and Sons over a quarter of a century and during that time we have found them to be a professional and ethical firm to deal with. They represent some of the worlds leading P.P.E manufacturers including the complete range of Bolle Safety products and are a firm believer in "Crowning the Customer"
Iain Conlon
Bolle


Polyco
"M A Healy is a leading distributor of BM Polyco products in Ireland, and has been for many years. With an exceptional level of customer service, M A Healy is committed to offering its customers the very best in hand protection, in every sector of industry."
Colin Moffett
Polyco



Follow us