ALL
4964 SIOEN Flexothane Boilersuit MONTREAL
please note that larger sizes may be more expensive, as displayed in the drop down below
Sizes Available: S - XXXL Montreal
Colours Available: Green : Navy: Orange: Royal Blue
100% waterproof/ windproof/ supple/ stretchable/ comfortable/ lightweight/ noiseless/ extended durability/ protection against liquid chemicals.
• High frequency welded seams
OUTSIDE
• Straight collar
• Foldaway hood in collar
• Zip closure under double flap with press studs
• Raglan sleeves
• Sleeve and ankle narrowing by press studs
• Elasticated waist in the back
INSIDE
• Elasticated wind cuffs in sleeves
MATERIAL
Flexothane Classic: 100% Polyamide knitting with PU coating/ ± 180 g/m²
Portwest KS18 Granite holster work shorts are stylish, practical and the ideal choice for warmer weather. The use of high quality polycotton fabric offers the comfort and durability necessary in today’s work environments. Tuck-away holster pockets made from rugged nylon oxford are perfect for tools. Other multiple pockets offer secure storage and accommodate smart phone dimensions.
MAVERIC 4603
BIB & BRACE
100% waterproof/ windproof/ supple/ stretchable/ comfortable/ lightweight/ noiseless/ extended durability
• High frequency welded seams
OUTSIDE
• Braces with buckles
• Legs adjustable by press studs
• Bib in front
MATERIALFlexothane Classic: 100% Polyamide knitting with PU coating/ ± 180 g/m²
The SIOEN 2673 Trapani Long Sleeve Thermal base layer t-shirt gives a snug fit thanks to its soft fabric and elastic. A wonderful base layer for cold weather, this thermal base layer t-shirt has a range of applications.
CORK
SLEEVES 1 Size
100% waterproof/ Elasticated borders/ Length 50 cm washable at 95 °C
• Taped seams
MATERIAL
Flexothane KLEEN: 100% Polyamide 6.6 knitting with PU coating/ ± 170 g/m²
DISCLAIMER
SINGLE GAUNTLET ONLY
Piercan Isolator Single Glove 18700 E4 10" B Butyl S 8.5 available in Butyl materials, lengths and port sizes suitable for use in fixed and mobile isolator units.
This glove suits 10" Port 700 Length .4mm thick B Butyl BHP S8.5 (OTHER PORTS AND SIZE AVAILABLE) (BHP - Butyl High Performance)
ButylButyl is an elastomer made from isoprene - isobutylene copolymer rubber. it has low permeability to gas and good resistance to chemical products, which allows it to be used in operations carried out in highly oxidizing environments including active oxygen and free radicals.
This material is particularly recommended for:
Oxidizing products
Acids
Alkalis
Alcohols
Ketones
This glove is not suitable for handling:
Gasoline
Aromatic solvents
Oils & Plasticisers
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
Sizes available to choose below
10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 8
10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 9
10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 10
13750 Port 8" - Length 750 - .4mm thick B Butyl Size 7.5
13800 Port 8" - Length 800 - .4mm thick B Butyl Size 8.5
18800 Port 10" -Length 800 - .4mm thick B Butyl Size 8.5
18800 Port 10" -Length 800 - .4mm thick B Butyl Size 9.5
18800 Port 10" -Length 800 - .6mm thick B Butyl Size 9.5
97800 Port 12" -Length 800 - .6mm thick B Butyl Size 9 A/S
Piercan Isolator Single Glove 18800 E6 10" C NEOPRENE S10 Isolator Glove Box Gauntlets available in Neoprene materials, lengths and port sizes suitable for use in fixed and mobile isolator units. This glove GLV 10" 800 .6mm C Neoprene S10 GLV 10" 800 .6mm C Neoprene S10
Code: 18800 C 9 6/10(OTHER PORTS AND SIZE AVAILABLE)
Neoprene Neoprene is made of polychloroprene rubber. It provides good resistance to the effects of ozone ageing, oxygen, weathering, heating and chemical products. Neoprene is self-extinguishing material therefore providing excellent flame resistance for the gauntlet. It is the ideal elastomer, which provides best compromise to resist the conjugate action of several potentially harmful agents such as oil and ozone or heat and oil.
It allows operating in high oxidizing environments including ozone, active oxygen and/or free radicals. It is resistant to natural ageing.
Neoprene offers increased resistance to ozone, petroleum based chemicals and heat and oils, whilst maintaining good flexibility.
Neoprene is suitable for :
Oxidising products
Acids
Alkalis
Alcohols
Petrol
Mineral oils
This glove is not suitable for handling:
Chlorinated solvents
Aromatic solvents
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
SINGLE GAUNTLET ONLY
Piercan Isolator Single Glove 97800 E6 12" H Nr Latex Size 9 available in Natural Rubber Latex materials, lengths and port sizes suitable for use in fixed and mobile isolator units.
This glove suits 12" port 800 length .6mm thick H Nr Latex S9 (OTHER PORTS AND SIZE AVAILABLE)
Natural Rubber Latex Natural rubber is renown as one of the most comfortable and stretcable elastomers available. This means that over prolonged use, the material's properties ensure that hand fatigue is minimised.
Natural rubber is ideal for applications where tear and abrasion resistance is required.
Natural Rubber Latex is suitable for handling chemical products such as:
Acids
Alkalis
Alcohols
This glove is not suitable for handling:
Aromatic hydrocarbons
Chlorinated solvents
Ethers & esters
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
Sizes available to choose below
10330 Port 6" - Length 330 - .4mm thick H Nr Latex Size 8
10330 Port 6" - Length 330 - .4mm thick H Nr Latex Size 9
10330 Port 6" - Length 330 - .6mm thick H Nr Latex Size 8
10330 Port 6" - Length 330 - .6mm thick H Nr Latex Size 9
10700 Port 6" - Length 700 - .4mm thick H Nr Latex Size 7
10800 Port 6" - Length 800 - .6mm thick H Nr Latex Size 5
10800 Port 6" - Length 800 - .6mm thick H Nr Latex Size 7
10800 Port 6" - Length 800 - .6mm thick H Nr Latex Size 8
97800 Port 12" Length 800 - .6mm thick H Nr Latex Size 9*
SINGLE GAUNTLET ONLY
Piercan Isolator Single Glove Isolator Glove Box Gauntlets Y CSM available in CSM materials, lengths and port sizes suitable for use in fixed and mobile isolator units. This glove 97800 12" CSM (Hypalon) .4mm Size 9 (OTHER PORTS AND SIZE AVAILABLE)
CSM is Chlorosulphonated polyethylene and shows its true strength when exposed to high temperatures, oxidizing chemicals and oxidizing environments such as ozone, active oxygen and free radicals. It resists flex cracking and abrasion as well as the damaging effects of weather, UV radiation and ageing.
CSM has demonstrated long life in harsh environments and is used in a wide range of industrial and automotive applications that require high performance. In addition it offers good flame resistance and good mechanical and low temperature properties.
The type of CSM used in our range of isolator gauntlets has been chosen to give a low modulus product and a very flexible gauntlet.
This material is suitable for:
Oxidizing products
Acids
Alkalis
Alcohols
This glove is not suitable for handling:
Ketones
Aromatic solvents
Plasticisers
Attributes
Glove type: Reusable
Offers protection from: Medical Contamination
Working Environments Clean
Level of grip Low
Level of Dexterity Low
European Standards
EN374-2 - Resistance to penetration by micro-organisms
EN374-3 - Resistance to chemical hazards (permeation)
EN388 - Resistance to Mechanical Hazards
Commonly used in:
Medical/Vet/Dental
Chemical Manufacture and Use
Laboratory and Pharmaceutical
Comparison Tosoh vs Hypalon (CSM)
Available
The Gutser 1.2m Ceiling Bar with Nail Puller is an ideal tool for those involved in the ripping up of floors and similar demolition work. Good posture is enabled by the angled head design.. The nail puller allows to the user to avoid having to bend when removing nails from floors. The tool also features spear shaped points on the head of the tool to get under floor coverings – ideal when it comes to floor ripping jobs.
Features:
* Nail puller to save you having to bend over when removing nails from floors.
* Spear shaped points on the head of the tool to get under floor coverings when ripping them up.
.
* Angle of the head helps the user to maintain a vertical posture.
The Gutser 1.5m Bar with Wheels and Nail Puller allows you to say goodbye to
tedious flooring ripouts and tough demoiltion jobs. Its handy nail puller means you no longer have to get down on your knees to pull out those nasty nails that just won't budge from your floor.
Features:
* Grants the user a stable position with max leverage when ripping out floors.
* No need to bend down when removing old nails from the floor.
* Users can keep an almost vertical stance when ripping out an old floor or demolishing.
Technical Product Files
No product files are currently available for this product.