ALL

GEMINI HV

Sizes AvailableS - XXXL

Colours AvailableHi Vis Orange : Hi Vis Yellow

HI-VIS RAINTROUSERS
100% waterproof/ windproof/ supple/ stretchable/ comfortable/ lightweight/ noiseless/ extended durability

• High frequency welded seams

OUTSIDE

• Legs adjustable by press studs

• Elasticated waist

MATERIAL
Flexothane Classic/ 100% Polyamide knitting with PU coating/ ± 180 g/m²

Please note that larger sizes may be more expensive, as displayed in the drop down below

GEMINI

Sizes AvailableS - XXXL

Colours AvailableHi Vis Orange

HI-VIS RAINTROUSERS
100% waterproof/ windproof/ supple/ stretchable/ comfortable/ lightweight/ noiseless/ extended durability

• High frequency welded seams

OUTSIDE

• Legs adjustable by press studs

• Elasticated waist

MATERIAL
Flexothane Classic/ 100% Polyamide knitting with PU coating/ ± 180 g/m²

Please note that larger sizes may be more expensive, as displayed in the drop down below

654Z TROUSER TOMAR BLACK

• Taped seams

OUTSIDE

• Front fly

• 2 Inset pockets

• 1 Patch pocket on the thigh

• Ankles adjustable by touch and close fastening

• Elasticated waist with drawstring

INSIDE

• Fixed polyamide Lining

MATERIAL

Siopor Extra: 100 % Polyester Fabric (cotton touch) with 100 % PU laminate/ ± 205 g/m²

Sizes Available: S - XXXL Colour Black

The SIOEN 5841 Tarviso hi-vis raintrousers are also available in Yellow/Navy.

The SIOEN 5841 Tarviso Hi-Vis rain trousers showcase a cutting-edge 100% waterproof and windproof design, ensuring unparalleled dryness and protection. The advanced breathable construction, complemented by an outer fabric with water-repellent properties and an interior moisture-attracting coating.

Constructed from the robust SIOPOR EXTRA fabric, a 100% polyester material with a cotton-like texture and a 100% PU laminate, these trousers demonstrate remarkable tear resistance, reaching approximately 205 g/m². The exterior is equipped with a front fly featuring press studs, two practical inset pockets, leg narrowing achieved through press studs, and an elasticated waist with a drawstring, ensuring a snug and secure fit.

TIELSON ORANGE NAVY


Sizes Available S - XXXL

Colours Available Orange/Navy : Yellow/Navy

FLAMERETARDANT, ANTISTATIC HI-VIS RAINTROUSERS

100 % waterproof/ windproof/ highly breathable/ water repellent outer fabric/ moisture attracting coating on the inside/ very comfortable/ supple/ high tear resistance

• Taped seams

OUTSIDE

• Legs adjustable by press studs

• Elasticated waist

INSIDE

• Fixed flame retardant cotton lining

MATERIAL
Sio-Start FR AST: 100 % Polyester Fabric with 100 % FR PU coating + AST/ ± 250 g/m²

Please note that larger sizes may be more expensive, as displayed in the drop down below

TIELSON YELLOW/NAVY


Sizes Available S - XXXL

Colours Available Orange/Navy : Yellow/Navy

FLAMERETARDANT, ANTISTATIC HI-VIS RAINTROUSERS

100 % waterproof/ windproof/ highly breathable/ water repellent outer fabric/ moisture attracting coating on the inside/ very comfortable/ supple/ high tear resistance

• Taped seams

OUTSIDE

• Legs adjustable by press studs

• Elasticated waist

INSIDE

• Fixed flame retardant cotton lining

MATERIAL
Sio-Start FR AST: 100 % Polyester Fabric with 100 % FR PU coating + AST/ ± 250 g/m²

Please note that larger sizes may be more expensive, as displayed in the drop down below

Portwest KS18 Granite holster work shorts are stylish, practical and the ideal choice for warmer weather. The use of high quality polycotton fabric offers the comfort and durability necessary in today’s work environments. Tuck-away holster pockets made from rugged nylon oxford are perfect for tools. Other multiple pockets offer secure storage and accommodate smart phone dimensions.

MAVERIC 4603



BIB & BRACE

100% waterproof/ windproof/ supple/ stretchable/ comfortable/ lightweight/ noiseless/ extended durability


• High frequency welded seams

OUTSIDE

• Braces with buckles

• Legs adjustable by press studs

• Bib in front

MATERIALFlexothane Classic: 100% Polyamide knitting with PU coating/ ± 180 g/m²

The SIOEN 2673 Trapani Long Sleeve Thermal base layer t-shirt gives a snug fit thanks to its soft fabric and elastic. A wonderful base layer for cold weather, this thermal base layer t-shirt has a range of applications.

CORK


SLEEVES 1 Size
100% waterproof/ Elasticated borders/ Length 50 cm washable at 95 °C

• Taped seams

MATERIAL
Flexothane KLEEN: 100% Polyamide 6.6 knitting with PU coating/ ± 170 g/m²
DISCLAIMER

SINGLE GAUNTLET ONLY



Piercan Isolator Single Glove 18700 E4 10" B Butyl S 8.5 available in Butyl materials, lengths and port sizes suitable for use in fixed and mobile isolator units.
This glove suits 10" Port 700 Length .4mm thick B Butyl BHP S8.5 (OTHER PORTS AND SIZE AVAILABLE) (BHP - Butyl High Performance)



ButylButyl is an elastomer made from isoprene - isobutylene copolymer rubber. it has low permeability to gas and good resistance to chemical products, which allows it to be used in operations carried out in highly oxidizing environments including active oxygen and free radicals.


This material is particularly recommended for:


Oxidizing products

Acids

Alkalis

Alcohols

Ketones



This glove is not suitable for handling:


Gasoline

Aromatic solvents

Oils & Plasticisers


Attributes


Glove type: Reusable

Offers protection from: Medical Contamination

Working Environments Clean

Level of grip Low

Level of Dexterity Low


European Standards


EN374-2 - Resistance to penetration by micro-organisms

EN374-3 - Resistance to chemical hazards (permeation)

EN388 - Resistance to Mechanical Hazards


Commonly used in:

Medical/Vet/Dental

Chemical Manufacture and Use

Laboratory and Pharmaceutical

Sizes available to choose below

10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 8

10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 9

10330 ELS GAUNTLET - Length 330 - .4mm thick B Butyl Size 10

13750 Port 8" - Length 750 - .4mm thick B Butyl Size 7.5

13800 Port 8" - Length 800 - .4mm thick B Butyl Size 8.5

18800 Port 10" -Length 800 - .4mm thick B Butyl Size 8.5

18800 Port 10" -Length 800 - .4mm thick B Butyl Size 9.5

18800 Port 10" -Length 800 - .6mm thick B Butyl Size 9.5

97800 Port 12" -Length 800 - .6mm thick B Butyl Size 9 A/S

Piercan Isolator Single Glove 18800 E6 10" C NEOPRENE S10 Isolator Glove Box Gauntlets available in Neoprene materials, lengths and port sizes suitable for use in fixed and mobile isolator units. This glove GLV 10" 800 .6mm C Neoprene S10 GLV 10" 800 .6mm C Neoprene S10

Code: 18800 C 9 6/10(OTHER PORTS AND SIZE AVAILABLE)



Neoprene Neoprene is made of polychloroprene rubber. It provides good resistance to the effects of ozone ageing, oxygen, weathering, heating and chemical products. Neoprene is self-extinguishing material therefore providing excellent flame resistance for the gauntlet. It is the ideal elastomer, which provides best compromise to resist the conjugate action of several potentially harmful agents such as oil and ozone or heat and oil.

It allows operating in high oxidizing environments including ozone, active oxygen and/or free radicals. It is resistant to natural ageing.




Neoprene offers increased resistance to ozone, petroleum based chemicals and heat and oils, whilst maintaining good flexibility.


Neoprene is suitable for :


Oxidising products

Acids

Alkalis

Alcohols

Petrol

Mineral oils






This glove is not suitable for handling:


Chlorinated solvents

Aromatic solvents




Attributes


Glove type: Reusable

Offers protection from: Medical Contamination

Working Environments Clean

Level of grip Low

Level of Dexterity Low


European Standards


EN374-2 - Resistance to penetration by micro-organisms

EN374-3 - Resistance to chemical hazards (permeation)

EN388 - Resistance to Mechanical Hazards


Commonly used in:

Medical/Vet/Dental

Chemical Manufacture and Use

Laboratory and Pharmaceutical