FORESTRY/CHAINSAW

FORESTRY GLOVES WITH CHAIN SAW PROTECTION IN BOTH HANDS WITH CUFF
EN 381-7 class 0, 16 m/s EN 388 3 1 3 2

Anti-cut protection in bothhands / For heavy forestry tasks /
Recommended for tree surgery /Green hide leather / Aramid stitching
SIZES: 8 to 12

FORESTRY GLOVES WITH CHAIN SAW PROTECTION IN BOTH HANDS
EN 381-7 class 0, 16 m/s
EN 388 3 1 3 2
DESCRIPTION: Protection in both hand against cuts / For heavyforestry tasks /
Green hideleather / Aramid stitching
SIZES: 8 to 12

CHAINSAW TROUSERS, CLASS 1 TYPE A

KEY FEATURES:

• Beaver (PA/COT) outer fabric

• fully stretchable crotch to increase free movement

• Water repellent through finish and weaving method

OUTSIDE:

• Front fly with zip closure - closing by 1 button

• 2 inset pockets

• 1 patched back pocket with flap

• 1 double patched pocket for phone and chain file or measuring equipment

• 1 patched thigh pocket with flap

• Elasticated waist with loops for belt - buttons for braces

• Bib in back with buttons for braces

• Triple-needle stitching on the back seam to the inside leg

INSIDE:

• Polyester - cotton lining (65 % Polyester - 35% Cotton 85g/m2
)

• 6 layer FRONT protective inlay

FABRIC: Shiny water repellent 45% Polyamide - 55% cotton fabric ± 240 g/m2
Water repellent 65% Polyester - 35% cotton outer fabric ± 245 g/m2

SIZES: S - M - L - XL - XXL - XXXL

COLOUR: 526 green/hi-vis orang

SIP SAFETY BOOT “RANGERS” STYLE



EN ISO 20345 SB P and EN ISO 17249 class 2 - height 20 cm

Water-resistant hide leather / Steel safety/midsole / Steal top / Stitched and stuck sole /
Nitrile antiskid sole / Oil and heat resistant

COLOR:Khaki

SIZES: Sizes 36 to 47 + 48

CLIMAX MOD 437 Complete Forestry Helmet Set - Helmet - Mesh Visor - Ear Muffs.

Forestry equipment for protection against impact from shavings and sawdust, sharp objects and similar particles.

Includes ear protection to SNR-27 db

Insert to Helmet Polycarbonate

Conforms to: EN 352-3, EN 1731

CLIMAX MOD 437 CADI Forestry Helmet Set - Helmet - Mesh Visor - Ear Muffs.

Forestry equipment for protection against impact from shavings and sawdust, sharp objects and similar particles.

Includes ear protection to SNR-27 db

CADI Climbing Style Helmet with High Density Polystyrene inside padding

Insert to Helmet ABS

Conforms to: EN 352-3, EN 1731

Spray Writer 370235 Forestry & Plantation Marking Paint - 350g

Dy-Mark’s Spray Writer is a reduced toxicity spray for all natural and cut timber applications. With reduced spray drift and low odour this convenient 360° marker is ideal for the forestry and timber processing industries.
Spray Writer is also suitable for use in the construction industry.

The product has been formulated to mark wet surfaces without cracking or flaking.

* Toluene-free formula

* Ideal for all natural and cut timber applications

* Will mark wet surfaces without cracking and peeling

* Unique formulation reduces spray drift allowing maximum accuracy of spray pattern

* Ideal for the forestry and timber processing industries

* Also suitable for marking masonry and concrete

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application
Hold can upright or in the inverted position and spray with the nozzle 15 – 20cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.

TECHNICAL DATA

Size: 350g Aerosol

Finish: Matt

Colour: 8 Standard and 7 Fluoro Colours

Consistency: Liquid

Coverage: Approximately 2 sqm per can (depending on the surface)

Suitable Surfaces: Natural and cut timber, concrete, masonry, bitumen

Drying Time: 10 minutes at 25°C

Temperature: Between 5°C and 40°C

STORAGE

Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

HIGHLY FLAMMABLE

Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions. Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:

* Slip resistance required

* Surface type

* Volume of traffic

* Potential exposure to any surface contaminants e.g. water, solvents or chemicals

KEEP AWAY FROM CHILDREN

Turf Master Temporary Grass Marking Paint 500g

Dy-Mark’s Turf Master is a quick drying marking paint designed for temporary application to grass –
without killing the roots. Turf Master is ideal for a range of applications including landscaping, sporting
grounds and golf courses.

* Quick dry, toluene-free formula

* Low toxicity formula does not damage grass

* Ideal for landscaping and sporting grounds

* Designed for use with the Dy-Mark Line Master

* Also suitable for use by hand (nozzle available separately)

Preparation

Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application

Insert can into the Line Master Spot Marking Handle. To achieve the narrowest line width, the spot
marking handle must be inserted into the lowest position. Line width can be increased by raising handle
in slot. Line width ranges between approx. 60mm and 100mm. Test line width by marking cardboard
until desired width is achieved. Masking wheels are designed to sharpen line edges by catching any
overspray at the edges only.

Removal

Turf Master can be removed with the use of water, a stiff brush and detergent.

TECHNICAL DATA

Size: 500g Aerosol

Finish: Matt

Colour: White

Consistency: Liquid

Coverage: 80 – 100 metres of line per aerosol can (depending on line width)

Suitable Surfaces: Grass

Drying Time: 10 minutes at 25°C

Ideal Application Temperature: Between 5°C and 40°C

STORAGE

Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.

DISPOSAL

Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

SAFETY INFORMATION

HIGHLY FLAMMABLE

Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.

Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:

? Slip resistance required

? Surface type

? Volume of traffic

? Potential exposure to any surface contaminants e.g. water, solvents or chemicals

KEEP AWAY FROM CHILDREN

SIOEN RUBBER CHAINSAW BOOTS 3SD7

1. Corresponds to fundamental requirements described in EN ISO 20345 :2004

2. Energy absorption of the heel : E

3. Steel toecap with impact resistance of 200J

4. Anti-perforation sole : P

5 Slip resistant sole : SRB

6. Sole resistant to hydrocarbons

7. KWF Gebrauchswert

8. Laces and calf height to facilitate putting on and taking off the boot

9. Upper made of natural and synthetic rubber

10. Cotton lining


APPLICABLE STANDARDS : EN ISO 20345 :2004 A1 /:2007 SB E P SRB

EN ISO 17249 : 2004 A1 /:2007 CLASSE 3, 28 m/s

WEIGHT: ±3.400 grams

SIZE RANGE : 39 to 47