Tel: 00353 402 32116

Product Detail

< Back

Spray Ink Stencil 39013502 Red*
Supplier Code: 18MM572
Ex VAT €4.97 EACH

Spray Ink Stencil & Colour Coding Paint 315g
Dy-Mark’s Spray Ink is a Toluene free stencil and colour coding paint which is suitable for marking on many surfaces. Available in a bold colour range, the unique formulation of Spray Ink minimises build-up when used with stencils.
Preparation Shake can for at least 20 seconds after the mixing ball begins to rattle.
Hold can upright or in the inverted position and spray with the nozzle 10 – 20cm from the surface. For best results, spray the surface using a side-to-side motion.
Toluene-free formula
Specially formulated for stencil applications
Also suitable for general colour coding
Fast drying and lightfast paint
Reduced spray drift allowing maximum accuracy of spray pattern
Unique formulation minimises build-up when used on stencils
Size: 315g Aerosol
Finish: Matt
Colour: 11 Colours
Consistency: Liquid
Coverage: Approximately 3 sqm per can (depending on the surface)
Suitable Surfaces: Will suit most surfaces including metals, timber, plastic, canvas and cardboard
Drying Time: 10 minutes at 25°C
Temperature: Between 5°C and 40°C
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
HIGHLY FLAMMABLE Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.



Follow us