Tel: 00353 402 32116

MARKING PAINT



Duo Perm Marker 12091001 Black
Supplier Code: 18MM841
Ex VAT €21.21 EACH

Industrial Marker Duo Permanent Ink 12091001 Black
Permanent ink marker suitable for surfaces that need an indelible mark
Xylene-free, fast-dry formula
Reversible bullet/chisel tip
Suitable for marking on wood, plastics, metals and cardboard
Aluminium shell with airtight cap
Pen dimensions: 135 x 16mm
Mark Width: Chisel Tip – 4mm, Bullet Tip – 2mm
Contents: 13cc permanent, smear resistant ink

Line Marking Paint 41015011 White*
Supplier Code: 18MM561
Ex VAT €7.78 EACH

Line Marking Paint 41015011 Durable Line Marking Paint - 500g
Dy-Mark’s Line Marking Paint is a fast drying acrylic paint, specially formulated to provide long lasting lines. Line Marking Paint is designed for use with the Dy-Mark Line Master and ideal for marking on car parks, factories, warehouses, sporting fields and courts.
A fast drying acrylic paint, designed for use with the Dy-Mark Line Master
Specially formulated to provide long lasting lines
Ideal for marking out car parks, factories, warehouses, sporting fields and courts
Toluene-free formula
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Insert can into the Line Marking Machine’s Spot Marking Handle. To achieve the narrowest line width, the spot marking handle must be inserted into the lowest position. Line width can be increased by raising handle in slot. Line width ranges between approx. 60mm and 100mm. Test line width by marking on cardboard until desired width is achieved. Masking wheels are designed to sharpen lines by catching any overspray at the edges only.
TECHNICAL DATA
Size: 500g Aerosol
Finish: Matt
Colour: 8 Standard Colours
Consistency: Liquid
Coverage: 80 – 100 metres of line per aerosol can (depending on line width)
Suitable Surfaces: Concrete, bitumen, grass, soil, timber
Drying Time: 10 minutes at 25°C
Ideal Application Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.
Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
* Slip resistance required
* Surface type
* Volume of traffic
* Potential exposure to any surface contaminants e.g. water, solvents or chemicals KEEP AWAY FROM CHILDREN

Mark-A-Line Marking White 750ml
Supplier Code: 18MN709
Ex VAT €7.84 EACH

Available in RED,BLUE,YELLOW,GREEN & WHITE
A lead and Xylene free resin based marking paint, used for marking in car parks, tennis courts, factories, warehouses, schools, garage forecourts etc. These paints produce a hard wearing, fast drying line and can be used on concrete, tarmacadam, wood and composites.

State: Aerosol
Colour: White
Odour: Characteristic odour
Oxidising: Non-oxidising (by EC criteria)
Solubility in water: Insoluble
Flammability limits %: lower: 0.8 upper: 18.6
Flash point°C: -10

Mine Marking H 38013503 Blue
Supplier Code: 18MM543
Ex VAT €9.38 EACH

Mine Marking 380135
Marking Out Paint - Horizontal - 350g -Horizontal features a standard paint nozzle (for where the main application is side walls
* Specially formulated for above/below ground areas specially formulated for above/below ground areas (not recommended for underground coal mines - use Safe Mark)
* High opacity, high quality, true colour pigment loading
* 360º degree valve for any direction spray
* Applications include marking out ore zones in grading control, pit walls and survey grid layouts
* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.
TECHNICAL DATA
Size: 350g Aerosol
Finish: Matt
Colour: 7 Standard and 6 Fluoro Colours
Consistency: Liquid
Coverage: Approximately 2-4 sqm per can (depending on the surface)
Suitable Surfaces: Rock, dirt, gravel
Drying Time: 3 minutes at 25°C
Temperature: Between -10°C and 40°C
STORAGE Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.

HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP AWAY FROM CHILDREN

Mine Marking U 38033511
Supplier Code: 18MM531
Ex VAT €9.38 EACH

Mine Marking 38033511
Marking Out Paint - Upright Inverted Spray - 350g
* Specially formulated for above/below ground areas
* High opacity, high quality, true colour pigment loading
* 360º degree valve for any direction spray
* Applications include marking out ore zones in grading control, pit walls and survey grid layouts
* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.
TECHNICAL DATA
Size: 350g Aerosol
Finish: Matt
Colour: 7 Standard and 6 Fluoro Colours
Consistency: Liquid
Coverage: Approximately 2-4 sqm per can (depending on the surface)
Suitable Surfaces: Rock, dirt, gravel
Drying Time: 3 minutes at 25°C
Temperature: Between -10°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.

KEEP AWAY FROM CHILDREN

MineSafe Mark U 38043526 N/F FLOrg*
Supplier Code: 18MM526
Ex VAT €8.26 EACH

Mine Marking NF Vert Orange 400G
Marking Out Paint - Upright - Inverted
* Non-flammable layout marker
* Formulated for use in underground mines and other fire sensitive situations
* 360º degree valve for any direction spray
* Bright, highly visible marks on dark surfaces
* Vertical spray is suitable for use with Dy-Mark’s Mine Marking Handle (5m extension)
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 20 – 25cm from the surface. Adjust the spray pattern by moving closer or further away from surface to be sprayed.
TECHNICAL DATA
Size: 400g Aerosol
Finish: Matt
Colour: 4 Standard and 3 Fluoro Colours
Consistency: Liquid
Coverage: Approximately 2-4 sqm per can (depending on the surface)
Suitable Surfaces: Rock, dirt, gravel
Drying Time: 5 minutes at 25°C
Ideal Application Temperature: Between -10°C and 40°C
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
Ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP OUT OF REACH OF CHILDREN

Paint Marker P10 12071001 Black*
Supplier Code: 18MM801
Ex VAT €22.39 EACH

Paint Marker P10 Medium Bullet Tip Black
High performance paint marker
Xylene-free, fast dry formula
Replaceable, heavy duty tips
Bold, easy to read marks
Pen dimensions: 142 x 14mm
Mark Width: 2mm
Contents: 10cc fast drying, Xylene-free paint

Paint Marker P20 12072002 Red*
Supplier Code: 18MM822
Ex VAT €25.08 EACH

Paint Marker P20 Reversible Bullet/Chisel Tip 12072002 RED
High performance paint marker
Xylene-free, fast dry formula
Replaceable, heavy duty and reversible tips
Bold, easy to read marks
Pen dimensions: 135 x 16mm
Mark Width: Chisel Tip 4mm, Bullet Tip 2mm
Contents: 13cc fast drying, Xylene free paint

Paint Marker P30 12073005 Yellow*
Supplier Code: 18MM835
Ex VAT €28.34 BOX 6

Paint Marker P30 Broad Chisel Tip 12073005 Yellow
High performance marker
Xylene-free, fast dry formula
Replaceable, heavy duty tips
Bold, easy to read marks

Spray & Mark U 40013505 Yellow*
Supplier Code: 18MM555
Ex VAT €4.83 EACH

Spray & Mark 400135Marking Out Paint - Inverted - 350g
Dy-Mark’s Spray & Mark is a premium marking out paint designed for a range of applications, including construction,landscaping, civil works and surveying. Spray & Mark is suitable for use with the Long Arm Handle and 2 wheel Spot Marking Handle, also available from Dy-Mark.
* Toluene-free formula
* High opacity, high quality, true colour pigment loading
* Unique spray pattern specifically designed for spot marking as well as "writing" applications
Preparation
Shake can for at least 20 seconds after the mixing ball begins to rattle.

Application
Hold can in the inverted position, approximately 15 – 20cm from surface. Spray thickness can be adjusted by moving closer or further away from the surface to be sprayed.

TECHNICAL DATA
Size: 350g Aerosol
Finish: Matt
Colour: Red, Blue, Yellow, White, Fluoro Green, Fluoro Pink, Fluoro Orange
Consistency: Liquid
Coverage: Will produce 200 ‘X’ marks, 80 - 100m in a 50mm continuous line, or cover 4 - 6 sqm
Suitable Surfaces: Concrete, bitumen, grass, rock, steel, timber and general broken ground
Drying Time: 5 minutes at 25°C
Ideal Application Temperature: Between 10°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL
Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods. SAFETY INFORMATION HIGHLY FLAMMABLE
Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal. Please note that the slip resistance and performance of this product depends on many factors outside the control of Dy-Mark; including surface preparation, correct application and environmental conditions.
Dy-Mark recommends a risk assessment prior to use to determine if the product is suitable to the:
* Slip resistance required
* Surface type
* Volume of traffic
* Potential exposure to any surface contaminants e.g. water, solvents or chemicals KEEP AWAY FROM CHILDREN

Spray Anti-Slip 23163500 Clear
Supplier Code: 18MM643
Ex VAT €7.60 EACH

Slip Resistant Coating

Spray Ink Stencil 39013502 Red*
Supplier Code: 18MM572
Ex VAT €4.97 EACH

Spray Ink Stencil & Colour Coding Paint 315g
Dy-Mark’s Spray Ink is a Toluene free stencil and colour coding paint which is suitable for marking on many surfaces. Available in a bold colour range, the unique formulation of Spray Ink minimises build-up when used with stencils.
Preparation Shake can for at least 20 seconds after the mixing ball begins to rattle.
Application
Hold can upright or in the inverted position and spray with the nozzle 10 – 20cm from the surface. For best results, spray the surface using a side-to-side motion.
Toluene-free formula
Specially formulated for stencil applications
Also suitable for general colour coding
Fast drying and lightfast paint
Reduced spray drift allowing maximum accuracy of spray pattern
Unique formulation minimises build-up when used on stencils
TECHNICAL DATA
Size: 315g Aerosol
Finish: Matt
Colour: 11 Colours
Consistency: Liquid
Coverage: Approximately 3 sqm per can (depending on the surface)
Suitable Surfaces: Will suit most surfaces including metals, timber, plastic, canvas and cardboard
Drying Time: 10 minutes at 25°C
Temperature: Between 5°C and 40°C
STORAGE
Store below 50°C. Do not store in direct sunlight or in vehicles under hot conditions. Protect aerosol cans against physical damage.
DISPOSAL Aerosol should be completely emptied prior to disposal. Contents of can are under pressure. Do not puncture or incinerate even when empty. When empty, dispose of this container through an approved recycling scheme or seek advice from your local council regarding accepted disposal methods.
SAFETY INFORMATION
HIGHLY FLAMMABLE Keep away from flame, heat and sources of ignition. Do not smoke and ensure adequate ventilation during use. Can be harmful by inhalation, in contact with skin and if swallowed. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP AWAY FROM CHILDREN



<< First - < Back - 1 - 2 - Next > - Last >>  
         

 









Follow us