Reflex T
Polycotton Glove with Latex Coating
Key Features
Seamless
Knitted polycotton liner.
Crinkle Finish
Latex Palm.
Flexible
Coating reduces hand fatigue.
Comfort
Open back for extra ventilation.
European Standards
EN388
Reflex K Plus
Seamless Knitted Kevlar® Liner with Flexible Latex Coating
Key Features
Cut Resistant
Kevlar provides increased protection against cuts, slashes and abrasion.
Durable
Heavy duty performance enhanced by the durable and puncture resistant latex coating.
Excellent Grip
Excellent grip in both wet and dry conditions for safe and secure handling.
Comfort
The seamless knitted Kevlar® liner provides exceptional comfort and reduces hand fatigue. The back of the glove is uncoated allowing the hand to breathe.
Sensitivity
The latex coating is very flexible affording better sensitivity and feel.
European Standards
EN388
Polyco GH315 Matrix Glove Black Size 9 Seamless Knitted Liner with Polyurethane Palm Coating
Key Features
* Cut Resistant - Liner offers maximum cut resistance, EN388 cut level 5
* Strength - Polyurethane coating on palm provides excellent abrasion and tear resistance
* Grip - Good grip for safer handling in wet and dry conditions
* Comfort - Seamless liner for comfort
* Knit Wrist - Elasticated knit wrist ensures a secure fit and keeps hands free of dust and debris
Attributes
* Glove type: Reusable
* Offers protection from: Cut
* Working Environments - Indoor - Outdoor - Dry - Oil and Grease - Clean - Dirty
* Level of grip - High
* Level of Dexterity - High
European Standards EN388 - Resistance to Mechanical Hazards
Commonly used in: Construction - Automotive - Assembly - Warehousing, Transport and Logistics -
Utility - Local Authority - Engineering and Manufacture - Glass Manufacture and Glazing
Reflex Hydro
High Visibility Thermal Lined Latex Coated Glove
Key Features
Warm Soft knitted thermal lining keeps hands exceptionally warm in cold conditions.
Durable Good all round protection with excellent puncture resistance.
Grip Crinkle latex three-quarter nitrile coating provides excellent grip in wet and dry conditions for safe and secure handling
Warm Knitted thermal lining keeps hands warm in cold conditions.
Comfort -Extremely comfortable to wear, and anatomical shape reduces hand fatigue
Knit Wrist - Elasticated for a secure fit.
European Standards
EN388 : EN511
Showa GP-KV1 Aramid Grip Glove - Protects Against: CUTS
Characteristics
Coated palm
Elasticated cuff
Rough finish over entire surface
Antibacterial and anti-odour treatment
Kevlar® fibre*
Anatomical shape
Seamless knit
CLASSIFICATION
CECat. II - EN388: 2003 :3444
LINER - Aramid
COATING - Latex
COLOUR - Yellow/blue
LENGTH - Dependent on size, in mm (flat) - 220-260
PACKAGING- Pairs per pack 10 /box120
SIZES - 7/S - 8/M - 9/L - 10/XL
Industries - Aerospace - Automotive - Construction - Manufacturing - Municipal services - Warehousing & distribution
SHOWA 240 ARC FLASH HEAT CUTS GREY LARGE
Forged with flame-resistant materials, the SHOWA 240 has a 13 Gauge knitted liner which contains Kevlar®, Modacrylic and Fibreglass, making the glove extremely strong and resilient.
ICharacteristics
I• 13 Gauge knitted liner containing Kevlar®, Modacrylic, and Fibreglass
I• Protects against arc flash: Arc flash level 2
I• EN 388 Cut level 5 resistance
I• Flame resistant materials
IBenefits
I• Flat dipped sponge neoprene coating provides excellent grip
I• Seamless liner prevents irritation
I• Anatomical design helps prevent hand fatigue
I• Colouring helps to extend wearable life
I• High resistance to cuts
I• Wrist protection
Industries
• Automotive • Construction • Manufacturing • Oil & gas • Railways • Steel & metals
LinerAramid
CoatingNeoprene
Colour Grey / black
LengthDependent on size, in mm (flat) - 230-270
Packaging Pairs per pack/box - 12/72
Sizes
7/S - SHO2401
8/M - SHO2402
9/L - SHO2403
10/XL - SHO2404
SKYTEC Ninja X4™ GLOVE Cut Level 4 Bi-Polymer Palm LARGE
FEATURES
• A supple and light glove, with cut level 4 resistance
• Anatomically designed to follow the natural curve of the hand and help reduce hand fatigue
• Excellent grip in both wet and dry environments
• High abrasion and tear resistance
DESCRIPTION
• Seamless nylon/glass fibre liner with a unique bi-polymer coated palm
• Breathable back of the hand to reduce perspiration and skin irritation
• Silicone free
• Elasticated wrist provides a secure fit
• Treated with Actifresh to kill bacteria and promote freshness
• Mottled grey and black colouring, suitable for the dirtiest of environments
TECHNICAL DATA
AVAILABLE SIZES 7/S • 8/M • 9/L • 10/XL • 11/XXL
PACKAGING 10/120 Pairs per pack/box
COLOUR OF LINER/COATING Grey/Black
Recommendations For Use
• These gloves resist cut but are not cut proof. Do no subject to high speed or serrated blades. Do not usenear moving machines if there is a risk of entanglement.
• Storage: Gloves should be ideally stored in cool, dry conditions in original packaging and away from
direct sunlight.
• Cleaning/Maintenance: Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. If appropriate, decontamination may take place under lukewarm water using laundry soap and detergent. Don’t use chlorine bleaches.
STANDAREDS
Cat - CE II
EN 388 standard - Abrasion 4 - Cut 4 - Tear 3
Puncture 2EN
Skytec Ninja Silver +TM Cut Level 5 PU Palm LARGE
FEATURES
• Maximum cut resistance at cut level 5
• Excellent grip in wet, oily or dry conditions
• High durability with high tear and abrasion resistance
• Anatomically designed for comfort, dexterity and fit, glove retains
flexibility despite its high protection levels
DESCRIPTION
• Machine knitted liners made with High Performance Polyethylene and glass yarn to provide a good cut resistance barrier, while offering dexterity and comfort
• Coated with Polyurethane on palm up to fingers
• Breathable to reduce perspiration and skin irritation
• Treated with Actifresh to kill bacteria and promote freshness
• Elasticated wrist provides a secure and comfortable fit
Recommendations For Use
• These gloves resist cuts but are not cut proof. Do not subject to high speed or serrated blades. Do not use near moving machines if there is a risk of entanglement. Not for use with liquids.
• Storage: Gloves should be ideally stored in cool, dry conditions in original packaging and away from
direct sunlight.
• Cleaning/Maintenance: Both new and used gloves should be thoroughly inspected, before being worn to
ensure no damage is present. Gloves should not be left in contaminated condition if re-use is intended.
Not recommended for washing or cleaning as the performance characteristics may differ to washed or
cleaned gloves
AVAILABLE SIZES 7/S • 8/M • 9/L • 10/XL
PACKAGING 10/120 Pairs per pack/box
COLOUR OF LINER/COATING Grey/Grey
STANDARDS
Cat - CE II
EN 388 standard - Abrasion 4 - Cut 5 - Tear 4 - Puncture 3
Touchstone Sleeve
100% Kevlar ® Sleeves
Available with thumb slot or loose fit.
Key Features
Cut Resistant
Kevlar ® provides increased protection against cuts, slashes and tear, whilst maintaining a high degree of dexterity for the wearer
Comfort
Soft Kevlar ® fibres seamless construction will not irritate arms, even during long periods of wear
Heat Resistant
100% Kevlar ® aramid fibre offers increased resistance to heat
Double ply Kevlar ®
Offers increased protection to the arm from cuts and abrasion
Thumb slot
Ensures that the sleeve will not slip exposing the wrist or arm
European Standards
EN407 : EN388
Thermatex
Terry Cloth Gloves, Gauntlets and Sleeves
Key Features
Terry Cloth
Superior quality cotton fabric.
Thermal
Excellent insulation against heat.
Performance
Good abrasion, cut and tear resistance.
Durable
Cost effective
European Standards>
EN388 : EN407
TIGMASTER WELDING GAUNLET
Sheepskin / Leather Welding Gauntlet
Key Features
Materials
Sheepskin palm (0.8mm) with heavy duty leather cuff (1.0mm)
Welding
Specifically designed for type B (Tig welding) and light mechanical handling
Compliant
With EN12477 - Welding Standard.
Offers protection from:HEAT
European Standards
EN12744 - EN407
EN388:2003/MECHANICAL HAZARDS
EN407:2004/THERMAL HAZARDS
Test/Performance Level
Abrasion/2
Blade cut/1
Tear/1
Puncture/1
Range Available: sizes and codes
Medium Code LMW124/M
Large Code LMW124/L
THERMAL DATA
Burning Behaviour Level 4
Contact Heat Level 1
Convective Heat Level 2
Small Splashes of Molten Metal Level 4
Jet Heavy Duty Natural Rubber Glove - Flock Lined
Key Features
Performance
A heavyweight glove that will stand up to repeated knocks, rubbing and scuffing.
Chlorinated
Treated to harden the surface of the glove leaving it smooth to the touch, Jet also has a beaded cuff
Comfort
Anatomically shaped ensuring comfort and reducing hand fatigue.
Good Grip
Slip resistant pattern on palm of glove ensuring good grip in both wet and dry conditions.
Cuff
Beaded cuff to prevent liquid roll back
Cotton Flock
Soft cotton flock lining absorbs perspiration keeping hands cool
Hygiene
Contains fungicidal and bacteriostatic agent.
European Standards
EN388 - Resistance to Mechanical Hazards
No product files are currently available for this product.