CLIMAX

Filter Climax 725 Combi A2B2E2KP3 for use with 731 Full Face mask (02T7311)


Filter A2B2E2K2P3 against Organic Vapours, Solvents, Acid Gases, Halogens, Sulphur Oxide, Ammonia, Fine Dust and Aerosols

To be used with CLIMAX MASKS mod. 731 & 731-S

Designed to be attached to any mask with a standardized thread Compliant with standard EN 148/1.

Gas filters: A2 / A2B2 / A2B2E2K2 /
B2E2 / K2

Particle filters: P3

Combined filters: A2P2 / A2P3 / A2B2P3 /
A2B2E2K2P3 / B2E2P3 / K2P3

Special filters: A2B2E2K2HgP3

Respirator 731-S Full Face Mask to be combined standardized filter thread 40 din (725 combi filter Our Ref: 02T6251)

Full face mask with panoramic visor.

The mask is made of silicone rubber.

Filter type: gas, particles and combined.

Fastening: the harness has five anchoring points for better manipulation. The inner half mask is made or thermoplastic rubber.

Threaded connector complete with inhalation valve and sealing rubber to fit any filter manufactured according to EN-148/1.

Without filter. The filter is supplied separately according to the protection needed.

The lifespan of the mask is 5 years, as long as it is kept in its original packaging, and away from contaminated areas.

Half mask 757-S pre-assembled A1P3

Half mask made of silicone-thermoplastic rubber.

The filters are secured to the mask with a bayonet system. As they incorporate two filters, they offer very little resistance to breathing.

Conforms to: EN 143, EN 14387

CLIMAX MOD 437 Complete Forestry Helmet Set - Helmet - Mesh Visor - Ear Muffs.

Forestry equipment for protection against impact from shavings and sawdust, sharp objects and similar particles.

Includes ear protection to SNR-27 db

Insert to Helmet Polycarbonate

Conforms to: EN 352-3, EN 1731

CLIMAX MOD 437 CADI Forestry Helmet Set - Helmet - Mesh Visor - Ear Muffs.

Forestry equipment for protection against impact from shavings and sawdust, sharp objects and similar particles.

Includes ear protection to SNR-27 db

CADI Climbing Style Helmet with High Density Polystyrene inside padding

Insert to Helmet ABS

Conforms to: EN 352-3, EN 1731

The Climax Welding Helmet Mod 420 is suitable for all types of welding processes as of 5 amperes (MIG/MAG electrodes, TIG/WIG, plasma-jet cutting and welding) except for laser and gas welding. It is especially recommended for TIG welding for which it is equipped with a special detector.



The fastener system consists of a headgear with two straps (contour strap and cross strap). The circumference of the contour strap is adjustable and the cross strap can be adjusted by seven positions.



The contour strap includes cushions making for a more comfortable fit around the welder's head.



Welders' Helmet shell size: 325 x 235 mm



Material: Polyamide



Shades: Clear 4 and variable 9-13



Power supply: Solar cells and batteries



Harness size: 56-64 CM



EN 175 CE



EN 379 CE

Helmet Minero 5-RG Miners Helmet 10F01W

Material: HDPE

Plastic 6 point harness adjustable by toothed wheel ratchet

Equiped with standard lamp bracket and cable loop

Working temperature: -10ºC / + 50ºC

Electric insulation up to 440 Vac

Standards:EN397

Helmet 5-RG WHITE 10F31W

Material: HDPE

Plastic 6 point harness and harnes adjustable with a toothed wheel

Working temperature: -10ºC / + 50ºC

Electric insulation up to 440 Vac

Standards:EN397

CLIMAX ATEX 21-C 2 Point Harness

2 points of attachment with D ring: Dorsal and Frontal.

Material: Polyester webbing of 47 mm. Leg and Arm adjustment. Quick buckles.

Standard: EN 361

CLIMAX 2 Point Harness

2 points of attachment: Dorsal with D ring and Frontal with webbing

Material: Polyester webbing of 45 mm. Leg and Arm adjustment.

Standard: EN 361

CLIMAX 2 Point Harness

Full body harness can be used for prolonged positioning.

Two anchorage points, one chest and one back.
with D ring: Dorsal, Frontal and two lateral points.

Material: Polyester webbing of 47 mm. Leg and Arm adjustment.

Standard EN 361 EN 358

Lanyard Rope Eye-Eye

Rope manufactured in three-strand polyamide. 14 mm.

Available in two lengths: 1.5 mts. and 1.0m

Standard EN 354